Série CL

Technical Specification of CL/QL

CL5 CL3 CL1 QL5 QL1
Mixing Capacity Input Mixing Channels 72 mono + 8 stereo 64 mono + 8 stereo 48 mono + 8 stereo 64 mono + 8 stereo 32 mono + 8 stereo
Mix Buses 24 16
Matrices 8 (Input to Matrix supported) 8 (Input to Matrix supported)
Stereo Bus 1 1
Mono 1 1
Cue 1 (Second Cue Bus supported in CL V4.0 or later) 1 (Second Cue Bus supported in QL V4.0 or later)
Local Connectors Analog Inputs 8 32 16
Analog Outputs 8 16 8
MY Slots 3 2
Dante I/O Primary / Secondary Primary / Secondary
Digital Out 1 (AES/EBU) 1 (AES/EBU)
GPI 5 in / 5 out (CL V1.11 or later) 5 in / 5 out
Word Clock I/O Yes Yes
MIDI I/O In / Out In / Out
External Redundant PSU Optional PW800W No
Meter Bridge Output meter built-in Optional MBCL No
Ethernet Yes Yes
AC Inlet V-Lock Type V-Lock Type
Scene Memory Number of Scenes 300 300
Recall Safe Yes Yes
Focus Recall Yes Yes
Fade Time Yes (0s ~ 60s) Yes (0s ~ 60s)
Preview Yes (CL V1.51 or later) Yes
Selective Load / Save Yes (CL V1.7 or later) Yes
Tactile Control Keys Yes No (on-screen)
Input Channel Functions Gain Compensation Yes Yes
Digital Gain Yes (-96dB ~ +24dB) Yes (-96dB ~ +24dB)
ATT -96dB ~ 0dB -96dB ~ 0dB
HPF 20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) 20Hz ~ 600Hz, -6 or -12dB/oct Selectable
PEQ 4 Band Full PEQ
(RTA overlay support in CL V3.0 or later, New EQ Algorithms support in CL V4.0 or later)
4 Band Full PEQ
(RTA overlay support in QL V3.0 or later, New EQ Algorithms support in QL V4.0 or later)
Dynamics 1 Gate / Ducking / Compressor / Expander (Key-in Filter on the Compressor and Expander in CL V4.0 or later) Gate / Ducking / Compressor / Expander (Key-in Filter on the Compressor and Expander in QL V4.0 or later)
Dynamics 2 Compressor / Compander-H / Compander-S / De-esser Compressor / Compander-H / Compander-S / De-esser
Input Delay Yes (0ms ~ 1000ms, frame delay support in CL V3.0 or later) Yes (0ms ~ 1000ms, frame delay support in QL V3.0 or later)
Pan CENTER NOMINAL or LR NOMINAL for monaural input channels in CL V3.1 or later
L-MONO, R-MONO or LR-MONO for stereo input channels in CL V3.1 or later
CENTER NOMINAL or LR NOMINAL for monaural input channels in QL V3.1 or later
L-MONO, R-MONO or LR-MONO for stereo input channels in QL V3.1 or later
DCA Group 16 (Output DCA and DCA Roll-Out support in CL V2.0 or later, Scrollable DCA Roll-Out support in CL V4.0 or later) 16 (Output DCA support in QL V3.0 or later)
MUTE Group 8 8
Number of Inserts 2 (CL V2.0 or later) 2
Direct Out Yes Yes
Output Channel Functions PEQ 4 Band Full PEQ
(RTA overlay support in CL V3.0 or later, New EQ Algorithms support in CL V4.0 or later)
4 Band Full PEQ
(RTA overlay support in QL V3.0 or later, New EQ Algorithms support in QL V4.0 or later)
Dynamics 1 Compressor / Expander / Compander-H / Compander-S Compressor / Expander / Compander-H / Compander-S
MUTE Group 8 8
Number of Inserts 2 (CL V2.0 or later) 2
Premium Rack Number of Premium Racks 8 8
Mountable Device RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (CL V3.0 or later) / MBC4 (CL V4.0 or later) RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (QL V3.0 or later) / MBC4 (QL V4.0 or later)
Effect Rack Number of Effect Racks 8 8
Number of Effect Programs 54 54
Mountable Device Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (CL V3.0 or later) Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (QL V3.0 or later)
GEQ Rack Number of GEQ Racks 16 8
Mountable Device 31BandGEQ / Flex15GEQ / Dugan Automixer (CL V3.0 or later) / 8Band PEQ (CL V3.0 or later)
(RTA overlay support in CL V3.0 or later, GEQ gain control from the TOUCH AND TURN knob in CL V4.0 or later)
31BandGEQ / Flex15GEQ / Dugan Automixer / 8Band PEQ (CL V3.0 or later)
(RTA overlay support in QL V3.0 or later, GEQ gain control from the TOUCH AND TURN knob in QL V4.0 or later)
Dante Number of I/O Channels 64 in / 64 out 64 in / 64 out 32 in / 32 out
Number of I/O devices that can be discovered from the console *1 63 127
Number of I/O devices that can be mounted 24 24
Number of I/O devices with HA remote control *2 8 8
Dante Patch from Console Yes Yes
Recording USB Memory Recording Yes Yes
DVS Recording Yes (DVS and Nuendo Live bundled) Yes (DVS and Nuendo Live bundled)
Broadcast Functions 5.1 Surround Panning Yes (CL V3.0 or later) Yes (QL V3.0 or later)
Surround Monitor Yes (CL V3.0 or later) Yes (QL V3.0 or later)
Mix Minus Yes (CL V2.0 or later) Yes (QL V3.0 or later)
L-Mono / R-Mono / LR-Mono Yes (CL V3.0 or later) Yes (QL V3.0 or later)
Monitor Solo Mode Yes (CL V4.0 or later) Yes (QL V4.0 or later)
Second Cue Bus
(allows the MATRIX 7/8 to be used as a CUE B bus)
Yes (CL V4.0 or later) Yes (QL V4.0 or later)
Oscillator Sine Wave 1ch / Sine Wave 2ch (CL V3.0 or later) / Pink Noise / Burst Noise Sine Wave 1ch / Sine Wave 2ch (QL V3.0 or later) / Pink Noise / Burst Noise
Other Functions Port to Port No Yes
RTA Yes (CL V3.0 or later) Yes (QL V3.0 or later)
Output Port Delay Yes (0ms ~ 1000ms, frame delay support in CL V3.0) Yes (0ms ~ 1000ms, frame delay support in QL V3.0)
Cascade Yes (via MY slots) Yes
User Level Yes Yes
Help File Yes (CL V1.51 or later) Yes
Channel Link Yes (Output Channel Link support in CL V3.0 or later) Yes (Output Channel Link support in QL V3.0 or later)
Channel Copy/Move Yes Yes
Control & Monitoring for Digital Wireless Receivers Shure ULXD4D/ULXD4Q (CL V4.0 or later) Shure ULXD4D/ULXD4Q (QL V4.0 or later)
User Interface Display 10 inch Touch Panel 10 inch Touch Panel
Centralogic Section Yes No
Faders 16 + 8 + 8 + 2 16 + 8 + 2 8 + 8+ 2 32 + 2 16 + 2
Selected Channel Encoders Gain, HPF, PEQ (controls for 4 bands), Dynamics 1/2(Threshold only), Pan, Mix/Matrix Sends Gain, HPF, PEQ (controls for a selected band), Dynamics 1/2(Threshold only), Pan
Channel Encoder Yes (for Gain, Send Level, or an assigned parameter) No
Channel Name / Color Display Yes Yes
Custom Fader Banks Yes (customized for each fader section) Yes (customized for all faders in a lump, MASTER fader of FADER BANK A in QL V4.0 or later)
User Defined Keys 16 (x 4 banks in CL V3.0 or later) 12 (x 4 banks in QL V3.0 or later)
User Defined Knobs 4 4 (on-screen)
Touch and Turn Knob Yes (using a User Defined Knob) Yes
Monitor Level Knob Yes Yes (on-screen)
Wooden Arm Rest Yes No
iPad Stay Yes No Yes No
Rack-mounting No No Yes
Software Editor CL Editor (Win/Mac, CSV files import/export in CL Editor V4.0.0 or later) QL Editor (Win/Mac, CSV files import/export in QL Editor V4.0.0 or later)
StageMix CL StageMix (iPad app) QL StageMix (iPad app)
MonitorMix Yes (CL V4.00 or later) Yes (QL V4.00 or later)
Console File Converter Yes (Win/Mac) Yes (Win/Mac)

*1) This is the maximum number of devices shown in the ONLINE DEVICE LIST of Dante SETUP. Only devices shown in the list can be mounted from the console.
*2) Each rack in the REMOTE HA ASSIGN window can have up to 32 channels.

CL5, CL3, CL1

CL5 CL3 CL1
Sampling frequency rate Internal 44.1kHz / 48kHz 44.1kHz / 48kHz 44.1kHz / 48kHz
External 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
Signal delay Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz
Total harmonic distortion Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min. Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min. Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min.
Frequency response +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT
Dynamic range 112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min. 112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min. 112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min.
Hum & noise level Equivalent input noise -128dBu typ., Equivalent Input Noise, Input Gain=Max. -128dBu typ., Equivalent Input Noise, Input Gain=Max -128dBu typ., Equivalent Input Noise, Input Gain=Max
Residual output noise -88dBu, Residual output noise, ST master off -88dBu, Residual output noise, ST master off -88dBu, Residual output noise, ST master off
Crosstalk -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min. -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min. -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min.
Power requirements US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Power consumption 170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W 170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W 170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W
Dimensions W 1053mm (41 1/2in) 839mm (33 1/8in) 648mm (25 5/8in)
H 299mm (11 3/4in) 299mm (11 3/4in) 299mm (11 3/4in)
D 667mm (26 1/4in) 667mm (26 1/4in) 667mm (26 1/4in)
Net weight 36kg (79.4lb) 29kg (63.9lb) 24kg (52.9lb)
Others Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃

Analog Input Characteristics

Input Terminals GAIN Actual Load
Impedance
For use with nominal Input level Connector
Sensitivity*1 Nominal Max. before clip
OMNI IN 1-8 +66dB 7.5kΩ 50-600Ω Mics &
600Ω Lines
-82dBu (61.6μV) -62dBu (0.616mV) -42dBu (6.16mV) XLR3-31 type (Balanced)*2
-6dB -10dBu (245mV) +10dBu (2.45V) +30dBu (24.5V)
TALKBACK +64dB 10kΩ 50-600Ω Mics &
600Ω Lines
-70dBu (0.245mV)
-60dBu (0.775mV)
-40dBu (7.75mV)
XLR3-31 type(Balanced)*2
+20dB -26dBu (38.8mV) -16dBu (0.123V) +4dBu (1.23V)

*1. Sensitivity is the lowest level that will produce an output of +4dBu(1.23V) or the nominal output level when the unit is set to maximum gain.(all faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced..(1=GND, 2=HOT, 3=COLD)
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All input AD converters are 24bit linear, 128times oversampling.
*5. +48V DC ( phantom power ) is supplied to OMNI IN (1-8) and TALKBACK XLR type connectors via each individual software controlled switches.

Analog Output Characteristics

Output Terminals Actual Source
Impedance
For Use With
Nominal
GAIN SW*5 Output Level Connector
Nominal Max. before clip
OMNI OUT 1-8 75Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.3 V) XLR-3-32 type(Balanced)*1
+18dB -2dBu (616mV) +18dBu (6.16V)
PHONES 15Ω 8Ω Phones - 75mW*6 150mW Stereo Phone Jack (TRS) (Unbalanced)*2
40Ω Phones - 65mW*6 150mW

*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. PHONES stereo phone jack is unbalanced.( Tip=LEFT, Ring=RIGHT, Sleeve=GND )
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All output DA converters are 24bit, 128times oversampling.
*5. There are switches inside the body to preset the maximum output level.
*6. The position of the level control is 10dB lowered from Max.

Digital Input & Output Characteristics

Terminal Format Data length Level Audio Connector
Primary/Secondary Dante 24bit or 32bit 1000Base-T 64ch Input/64ch Output @48kHz etherCON Cat5e

Digital Output Characteristics

Terminal Format Data length Level Connector
DIGITAL OUT AES/EBU AES/EBU Professional Use 24bit RS422 XLR-3-32 type (Balanced) *1

*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)

I/O Slot (1-3) Characteristics

Control I/O Characteristics

Each I/O Slot accepts a Mini-YGDAI card. Only Slot1 has a serial interface.

Terminal Format Level Connector
MIDI IN MIDI - DIN Connector 5P
OUT MIDI - DIN Connector 5P
WORD CLOCK IN - TTL/75Ω terminated BNC Connector
OUT - TTL/75Ω BNC Connector
GPI (5IN/5OUT) - - D-Sub Connector 15P (Female) *1
NETWORK IEEE802.3 10BASE-T/100Base-TX/ RJ-45
LAMP (CL5=3, CL3=2, CL1=1) - 0V - 12V XLR-4-31 type *2
USB HOST USB 2.0 - USB A Connector (Female)
Meter Bridge (CL3/CL1 only) - - D-Sub Connector 9P (Female)

*1. Input pins: Internal TTL-level pull-up resistors provided (47kΩ). Output pins: Open-drain output (Vmax = 12V, max. sink current/pin = 75mA) Power pins: Output voltage Vp = 5V, max. output current Imax = 300mA
*2. Pin 4 = +12V, Pin 3 = GND, lamp rating 5W. Software voltage control.