DM3 Firmware V2.00
Important Notices
Please read the following instructions and notes before updating DM3 series consoles.
Cautions when updating
- Use “dm3_firm200.zip” for the update.
- When updating, copy the unzipped file “DM3_firmware_V2.00.bin” to the root directory of a USB flash drive, and follow the instructions on the update guide. With DM3 (Dante model), the Dante firmware also needs to be updated. This can be achieved at the same time by using the same USB flash drive.
- When updating the Dante firmware, the message "Dante Update Error. Dante Primary Port has no network link." may appear. In this case, connect another network device to the Dante Primary port and follow the update guide. If no other network devices are available, avoid the error by connecting the Dante Primary port (1) and network port (2) on the DM3 using an ethernet cable and then follow the update guide before proceeding.
- *IMPORTANT NOTES*
Before copying the firmware files, delete all other files with extension .BIN from the root directory of the USB flash drive.
Cautions for Dante Domain Manager (DDM)
- Please check here when using DDM.
*IMPORTANT NOTES*
For DM3 to control other Dante I/O devices while the console is enrolled in a DDM domain, V2.00 firmware is required. The console must be locally logged into the domain in order to establish control.
Cautions when using d&b audiotechnik DS10 Audio network bridge
- When DM3 (Dante model) is connected to the same Dante network with d&b audiotechnik DS10 Audio network bridge, please ensure that all DS10 units are running firmware V2.0.4.1, available via Dante Updater. If running older firmware, the Dante Patch process from DM3 may not work correctly or behaves in an unstable manner. This prevents HA remote control of external Dante I/O devices such as R series, from working correctly with DM3.
DM3 Series Firmware/Editor Compatibility
- Please make sure an appropriate version of Editor software is used, which is compatible with your console firmware in reference to the following compatibility chart. Using an unsupported Firmware/Editor and other related software combination may result in unexpected behavior.
Main Revisions and Enhancements
New features in V2.00
- Added Insert Points and Patch for Input and Output channels.
- A new Preference for USB Driver Mode has been added to connect computers via the [USB TO HOST] connector (Please refer to the DM3 series Reference Manual for details).
- Added Dante Domain Manager login function.
- Added Screen Calibration function.
- Added Fader Position Calibration function.
Improvements in V2.00
- exFAT is now supported as a file system for USB storage devices.
- The RECORDER view now supports PLAYBACK position changes.
- Improved the system LOG function.
- Added DANTE Device Locked and AES67 Mode indicators to the DANTE Setup screen.
Fixed bugs in V2.00
- Fixed a problem in which the GEQ Fader Assign button was incorrectly displayed in some screens.
- Fixed a problem in which the original recorded file name remained on the RECORDER screen even after the file name was changed, due to the file size limitation of the USB storage device.
- Fixed a problem in which some selected items displayed in pop-up menus were not refreshed after changing the selection using the same menu in DM3 Editor.
- Fixed a problem in which the selected effect in the EFFECT TYPE screen was not refreshed after changing the effect type in DM3 Editor.
- Fixed a problem in which a small noise occurred when a Pre Fader Send Point was selected.
Known issues
- After changing the region, date, and time settings in the Date/Time screen of the Setup menu, Dante patches with externally connected Dante I/O devices may not be changed, or HA parameters may not be remotely controlled. If this symptom occurs, please reboot the DM3 unit. This problem will be fixed in a future firmware update.
Notices for usage
- The Dante module will be reset to DAISY CHAIN mode following initialization. If Dante is used with a redundant connection, unplug the Dante network cables before initializing, reconfigure the Dante settings and then re-attach the network cables.
Notices for version updating
- When updating DM3 series from V1.13 or earlier to V2.00 or later, the console may not restart automatically during the update process. Please restart the console manually as follows. About 1 minute after starting the update, the display will black out, and only the [SEL] keys and a cursor in the upper-left corner of the screen will blink, which means that the file has been successfully transferred. Wait 10 seconds, then reboot the console with the power switch to start the rest of the update process.
NOTICES
- DM3 consoles can control the HA parameters of up to 16 I/O devices as listed below.
- Rio3224-D2, Rio1608-D2, Rio3224-D, Rio1608-D, Ri8-D
- Tio1608-D2, Tio1608-D
- DM3 used as an I/O device (*1)
*1) The same Unit ID cannot be shared with the DM3 console when it is used as an I/O device to control its HA parameters.
- The HA parameters of DM3 used as an I/O device can be remotely controlled from up to 10 consoles and control apps as listed below.
- RIVAGE PM (HY144-D(-SRC)), DM7, CL, QL (*2), DM3 (*3)
- ProVisionaire Control, ProVisionaire Touch, etc.
*2) Up to four consoles can control the DM3, as the DANTE CONTROL ID for RIVAGE PM (HY144-D(-SRC)) and the console ID for DM7, CL, and QL cannot share the same ID number.
*3) The same Unit ID cannot be assigned to a DM3 to control HA parameters of another DM3 used as an I/O device.
- When a single DM3 is used both as a console and an I/O device, up to 10 consoles and control apps as listed below can control its functions as well the HA parameters as an I/O device.
- RIVAGE PM (HY144-D(-SRC)), DM7, CL, QL (*4), DM3 (*5)
- MonitorMix, ProVisionaire Control, ProVisionaire Touch, etc.
*4) Up to four consoles can control the DM3, as the DANTE CONTROL ID for RIVAGE PM (HY144-D(-SRC)) and the console ID for DM7, CL, and QL cannot share the same ID number.
*5) The same Unit ID cannot be assigned to a DM3 to control HA parameters of another DM3 used as an I/O device.
- When setting up the latency in Dante Controller, and there is a discrepancy in latency between the transmit device and the receive device, the largest (slowest) latency setting of the two devices will be applied.
Contrat de licence et fichier de téléchargement
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY ABORT USING THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Subject to the terms and conditions of this Agreement, Yamaha hereby grants you a license to use copy(ies) of the software program(s) and data ("SOFTWARE") accompanying this Agreement, only on a computer, musical instrument or equipment item that you yourself own or manage. The term SOFTWARE shall encompass any updates to the accompanying software and data. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
2. RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
- You may not use the SOFTWARE in any manner that might infringe third party copyrighted material or material that is subject to other third party proprietary rights, unless you have permission from the rightful owner of the material or you are otherwise legally entitled to use.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or provision of this Agreement is violated, this Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately abort using the SOFTWARE and destroy any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
5. LIMITATION OF LIABILITY
YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. OPEN SOURCE SOFTWARE
This SOFTWARE may include the software or its modifications which include any open source licenses, including but not limited to GNU General Public License or Lesser General Public License ("OPEN SOURCE SOFTWARE"). Your use of OPEN SOURCE SOFTWARE is subject to the license terms specified by each rights holder. If there is a conflict between the terms and conditions of this Agreement and each open source license, the open source license terms will prevail only where there is a conflict.
7. THIRD PARTY SOFTWARE AND SERVICE
Third party software, service and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. IF, in the written materials or the electronic data accompanying the software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the terms of any agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
8. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. All legal notices, notice of disputes and demands for arbitration, and any other notice which purports to change these provisions or to assert legal entitlements must be sent in writing to:
Yamaha Corporation
10-1, Nakazawa-cho, Chuo-ku, Hamamatsu, Shizuoka, 430-8650, Japan
9. ENTIRE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement.
10. AMENDMENT
Yamaha may amend, revise or update this Agreement at its discretion. Any change or update that Yamaha makes to this Agreement will be effective after you agree with the updated terms of this Agreement or use this SOFTWARE.
Last updated : November 1, 2024