Série AG
Utilisation de la console de mixage pour les performances live.
You can use the AG series as a mixer for solo live performances with laptop computer and instruments.
Connexions
Mixer settings
1. Turn [MONITOR MUTE] off.
2. Turn the [GAIN] knobs to adjust the input gain level.
Adjust these so that the corresponding [PEAK] LEDs flash briefly when singing or playing the loudest. If GAIN is set too high, the sound for broadcasting will be distorted. If set too low, noise will be added to the sound.
Après avoir réglé le niveau de gain de sorte que les LED [PEAK] correspondantes clignotent brièvement lorsque vous chantez ou jouez le plus fort, tournez le bouton [GAIN] un peu vers la gauche, de sorte que le son reste généralement clair, même s'il y a parfois des pics dépassant ceux du réglage initial.
3. Turn the volume knobs on each channel to adjust the volume balance for each connected source.
4. Press the [COMP/EQ] button, [EFFECT] button, and [AMP SIM] button as necessary.
Turning [COMP/EQ] on adjusts the tone of the audio to make it easier to listen to.
Turning [EFFECT] on adds reverb to the audio.
Turning [AMP SIM] on adds a smooth overdrive sound like the distortion from a guitar amplifier.
You can use the level knobs to adjust the amount of distortion in [AMP SIM]. To reduce the amount of distortion, turn the knob to the left for a "crunchy" sound.
5. Use the speaker [ ] knob to adjust the [MONITOR OUT] volume as necessary.
