Boîtiers de scène série R 3e génération
| Rio3224-D3 | Rio1608-D3 | ||
|---|---|---|---|
| Sampling frequency rate | External | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm) | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm) |
| Signal delay | Less than 1.7 ms, Rio-D3 INPUT to Rio-D3 OUTPUT connect with DM7 using Dante, Fs=96 kHz. Dante Receive Latency set to 0.25 msec | Less than 1.7 ms, Rio-D3 INPUT to Rio-D3 OUTPUT connect with DM7 using Dante, Fs=96 kHz. Dante Receive Latency set to 0.25 msec | |
| Total harmonic distortion | Less than 0.05% +4 dBu@20 Hz - 20 kHz, GAIN : -6 dB into 600 Ω, Less than 0.15% +4 dBu@20 Hz - 20 kHz, GAIN: +66 dB into 600 Ω | Less than 0.05% +4 dBu@20 Hz - 20 kHz, GAIN: -6 dB into 600 Ω, Less than 0.15% +4 dBu@20 Hz - 20 kHz, GAIN: +66 dB into 600 Ω | |
| Frequency response | +0.5, –1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @1 kHz, input to output, Fs= 48 kHz or 96 kHz | +0.5, –1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @1 kHz, input to output, Fs= 48 kHz or 96 kHz | |
| Dynamic range | 120 dB typ., DA Converter, 115 dB typ., Input to Output, GAIN: -6 dB | 120 dB typ., DA Converter, 115 dB typ., Input to Output, GAIN: -6 dB | |
| Hum & noise level | Equivalent input noise | -128 dBu typ., GAIN: +66 dB | -128 dBu typ., GAIN: +66 dB |
| Residual output noise | -93 dBu, main stereo channel off | -93 dBu, main stereo channel off | |
| Crosstalk | INPUT: -100 dB, adjacent inputs, GAIN: -6 dB, @1 kHz, OUTPUT: -100 dB, input to output, @1 kHz | INPUT: -100 dB, adjacent inputs, GAIN: -6 dB, @1 kHz, OUTPUT: -100 dB, input to output, @1 kHz | |
| Power requirements | 100 - 240 V, 50/60 Hz | 100 - 240 V, 50/60 Hz | |
| Power consumption | 100 W | 60 W | |
| Dimensions | W | 480 mm (18.9") | 480 mm (18.9") |
| H | 220 mm (8.7") | 132 mm (5.2") | |
| D | 370 mm (14.6") | 370 mm (14.6") | |
| Net weight | 13.2 kg (29.1 lb) | 9.4 kg (20.7 lb) | |
| Accessories | Owner’s Manual, AC power cord×2, Open-Source Software License | Owner’s Manual, AC power cord×2, Open-Source Software License | |
| Others | NC Value: Fan Speed LOW: NC=20 / HIGH: NC=30 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 - 40°C, Storage temperature range: -20 - 60°C | NC Value: Fan Speed LOW: NC=15 / HIGH: NC=25 (Measurement position: 1 m from the front of the unit), Operating temperature range: 0 - 40°C, Storage temperature range: -20 - 60°C | |
- La distorsion harmonique totale est mesurée avec un filtre de 18 dB/octave à 80 kHz
- *2 Le bruit et le ronflement sont mesurés à l'aide d'un filtre à pondération A.
- La diaphonie est mesurée avec un filtre de 30 dB/octave à 22 kHz
Analog Input Characteristics
0 dBu = 0.775 Vrms.
+48 V DC (phantom power) is supplied to the [INPUT] 1-32 (1-16) connectors via each individual software-controlled switch.
*1. Sensitivity is the minimum level needed to output +4 dBu (1.23 V) or the specified level when the gain is set to maximum. (All faders and level controls are set to maximum.)
*2. 1=GND, 2=HOT, 3=COLD
Analog Output Characteristics
0 dBu = 0.775 Vrms.
*1. You can change the output level for the [OUTPUT +4dBu] 1-16 (1-8) connectors. Contact your Yamaha dealer.
*2. 1=GND, 2=HOT, 3=COLD
*3. The [PHONES] level knob is set to 12 dB below maximum.
*4. The [PHONES] level knob is set to 10 dB below maximum.
Digital Input & Output Characteristics
*1. Implemented only on the Rio3224-D3.
*2. 1=GND, 2=HOT, 3=COLD
Control I/O Standards
Use STP cables for connections.
